Manualshelf

Owner's Manual

ManualsBrandsDell ManualsComputer equipmentPowerConnect 6024F
111112113114115116117118119120
Clock 113
show sntp status
The
show sntp status
privileged EXEC command shows the status of the Simple Network Time
Protocol (SNTP).
Syntax
show sntp status
Default Configuration
This command has no default configuration.
Command Mode
Privileged
EXEC mode
User Guidelines
There are no user guidelines for this command.
ExamSples
The following example shows the status of the SNTP.
Server Polling Encryption Key
---------- -------- -----------------
10.1.1.91 Enabled 9
Broadcast Clients: Enabled
Anycast Clients: Enabled
Broadcast and Anycast Interfaces: g1, g3
Console# show sntp status
Clock is synchronized, stratum 4, reference is 176.1.1.8, unicast
Reference time is AFE2525E.70597B34 (00:10:22.438 PDT Jul 5 1993)
Unicast servers:
Server Status Last response Offset
[mSec]
Delay
[mSec]
--------- ------ --------------- ----- ------
176.1.1.8 Up 19:58:22.289 PDT Feb 19 2005 7.33 117.79
176.1.8.179 Unknown 12:17.17.987 PDT Feb 19 2005 8.98 189.19