Manualshelf

Owner's Manual

ManualsBrandsDell ManualsComputer equipmentPowerConnect 6024F
111112113114115116117118119120
116 DHCP Relay Commands
www.dell.com | support.dell.com
Command Mode
Global Configuration mode
User Guidelines
If no IP address is specified when using the
no
form of the command, all configured servers
are removed.
Example
The following example defines the DHCP server with the address 172.16.1.1 to be available for
DHCP address.
show ip dhcp relay
The
show ip dhcp relay
privileged EXEC command displays the defined DHCP relay server
addresses available for DHCP relay.
Syntax
show ip dhcp relay
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays DHCP relay server addresses.
Console(config)# ip dhcp relay address 172.16.1.1
Console# show ip dhcp relay
DHCP relay is enabled.
Servers: 172.16.1.11, 172.16.8.11