Owner's Manual

Ethernet Configuration Commands 143
Example
The following example displays the description for the interface g1.
show interfaces counters
The show interfaces counters user EXEC command displays traffic seen by the physical interface.
Syntax
show interfaces counters [ ethernet interface | port-channel port-channel-number ]
•
interface— A valid Ethernet port.
•
port-channel-number— A valid port-channel index.
Default Configuration
This command has no default configuration.
Command Modes
Privilege EXEC mode
User Guidelines
There are no user guidelines for this command.
Console# show interfaces description ethernet g1
Port Description
..... ...........
g1 connect_to_server