Owner's Manual

Ethernet Configuration Commands 147
port storm-control include-multicast
The port storm-control include-multicast global configuration command enables the device to
count Multicast packets together with Broadcast packets. To disable counting of Multicast packets,
use the
no form of this command.
Syntax
port storm-control include-multicast
no port storm-control include-multicast
Default Configuration
Multicast packets are not counted.
Command Modes
Global Configuration mode
User Guidelines
To control multicasts storms use the commands port storm-control broadcast enable and
port storm-control broadcast rate .
Example
The following example enables the counting of Multicast packets.
port storm-control broadcast enable
The port storm-control broadcast enable interface configuration command enables Broadcast
storm control. To disable Broadcast storm control, use the
no form of this command.
Syntax
port storm-control broadcast enable
no port storm-control broadcast enable
Default Configuration
Broadcast storm control is disabled.
Command Modes
Interface Configuration (Ethernet) mode
Console# configure
Console(config)# port storm-control include-multicast