Owner's Manual

GVRP Commands 151
GVRP Commands
gvrp enable (global)
GVRP, or GARP VLAN Registration Protocol, is an industry-standard protocol designed to
propagate VLAN information from device to device. With GVRP, a single switch is manually
configured with all desired VLANs for the network, and all other switches on the network learn
these VLANs dynamically.
The
gvrp enable global configuration command enables GVRP globally. To disable GVRP globally
on the switch, use the
no form of this command.
Syntax
gvrp enable
no gvrp enable
Default Configuration
GVRP is globally disabled.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example globally enables GVRP on the device.
gvrp enable (interface)
The gvrp enable interface configuration command enables GVRP on an interface. To disable
GVRP on an interface, use the
no form of this command.
Syntax
gvrp enable
no gvrp enable
Default Configuration
GVRP is disabled on all interfaces by default.
Console (config)# gvrp enable