Owner's Manual

184 IP Routing Protocol-Independent Commands
www.dell.com | support.dell.com
• reject-route —Discard all packets matching this route per RFC-2096, and handle them as
reject-route. These routes are treated as unreachable networks, and an
ICMP
unreachable route
is returned.
Default Configuration
The metric default distance is 1.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example establishes a static route to 172.16.0.0.
key-chain
The key-chain global configuration command defines authentication key group for routing
protocols. To remove the key chain, use the
no form of this command.
Syntax
key-chain name-of-chain
no key-chain name-of-chain
• name-of-chain —Key chain name.
Default Configuration
No key chain exists.
Command Mode
Global Configuration mode
User Guidelines
To use, an authentication key chain with keys must be configured.
The setting is effective only after reset.
RIP may use only up to two parallel paths.
After specifying the
key-chain command, the key chain configuration mode is opened.
Console (config)# ip route 172.16.0.0 255.255.0.0 131.16.1.1