Owner's Manual

222 Multicast Routing Commands
www.dell.com | support.dell.com
show ip mroute-next-hop
The show ip mroute-next-hop user EXEC command displays IP Multicast routing next hop
information.
Syntax
show ip mroute-next-hop [ group group-address ] [ source source-address ]
•
group group-address —Multicast group IP address.
•
source source-address —The source IP address.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays Multicast next hop information.
Console# show ip mroute-next-hop
Group Source Interface Up Time Expiry Time State Owner
------------------------------------------------------------
224.0.255.1 198.92.37.100/32 eth g2 20:20:00 0:02:55 Forward igmp
224.0.255.1 199.92.37.100/32 eth g2 1:4d:20m 0:02:55 Forward igmp
224.1.255.1 198.92.37.100/32 eth g2 21:20:00 0:02:55 Forward dvmrp
224.1.255.1 199.92.37.100/32 eth g2 1:4d:20m 0:02:55 Forward dvmrp