Owner's Manual

226 Multicast Routing Commands
www.dell.com | support.dell.com
The following table describes the fields shown in the display:
show ip dvmrp next-hop
The show ip dvmrp next-hop user EXEC command displays DVMRP-next-hop information on a
per-interface basis.
Syntax
show ip dvmrp next-hop [ ethernet interface-number | vlan vlan-id | port-channel number ]
•
ethernet interface-number —Ethernet port number.
•
vlan vlan-id —VLAN number.
•
port-channel number —Port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Field Description
Interface Interface type, number.
Neighbor The DVMRP neighbor IP address.
Up Time The time since this DVMRP neighbor became a neighbor of the local
router.
Expiry Time The minimum time remaining before this DVMRP neighbor is aged out.
Version The neighboring router DVMRP version number.
Capabilities Describes the neighboring router capabilities.
L—Indicates the neighbor has only one interface with neighbors.
P—Indicates the neighbor supports pruning.
G—Indicates the neighbor sends its generation ID in Probe messages.
M—Indicates the neighbor can handle mtrace requests.
State State of the neighbor adjacency. Can be One way, Active, ignoring or
down.