Owner's Manual

Multicast Routing Commands 229
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the DVMRP upstream prune state.
The following table describes the fields shown in the display:
show ip igmp interface
The show ip igmp interface user EXEC command displays IGMP related information about an
interface.
Syntax
show ip igmp interface [ ethernet interface-number | vlan vlan-id | port-channel number ]
•
ethernet interface-number —Ethernet port number.
•
vlan vlan-id —VLAN number.
•
port-channel number —Port-channel number.
Default Configuration
This command has no default configuration.
Console# show ip dvmrp prune
Group Source Expiry
Time
------------- ------------ --------
224.192.78.88 171.68.0.0/16 00:02:52
224.192.78.89 171.68.0.0/16 00:08:52
Field Description
Group The group address which has been pruned
Source The address of the source or source network which has been pruned.
Expiry time The amount of time remaining before this prune expires at the upstream
neighbor. This value should be the minimum of the default prune lifetime and
the remaining prune lifetimes of the local router downstream neighbors, if any.