Owner's Manual

Port Channel Commands 279
members of the aggregated link to half-duplex operation, and may, as per the standard, set
them all to Inactive.
Example
The following example shows how port g5 is configured to port-channel number 1 without LACP.
show interfaces port-channel
The show interfaces port-channel user EXEC command displays port-channel information (which
ports are members of that port-channel, and whether they are currently active or not).
Syntax
show interfaces port-channel [ port-channel-number ]
•
port-channel-number —Valid port-channel number information to display.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example shows how all port-channel information is displayed.
Console (config)# interface ethernet g5
Console (config-if)# channel-group 1 mode on
Console (config)# show interfaces port-channel
Channel Ports
------------ ------
Ch 1 Active g1, g2 Inactive g3
Ch 2 Active g2
Ch 3 Inactive g8