Owner's Manual

QoS Commands 307
Example
The following example creates a class-map named "class1" which requires all ACE’s to be matched.
show class-map
The show class-map user EXEC command displays all the class-maps configured on the device.
Syntax
show class-map [ class-map-name ]
•
class-map-name —Specifies the class-map name being displayed.
Default Configuration
If no name is requested all the class-maps are displayed.
Command Mode
User EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays the class-map called "class1".
match
The match class-map configuration command defines the match criterion to classify traffic. To
delete the match criterion use no form of this command.
Syntax
match access-group acl-name
no match access-group acl-name
• acl-name —Specifies the access list ACL MAC/IP name.
Default Configuration
By default, no match criterion is supported.
Console (config)# class-map class1 match-all
Console (config-cmap)#
Console> show class-map class1
Class Map match-any class1 (id4)