Owner's Manual

34 Command Groups
www.dell.com | support.dell.com
IP Routing
ip domain-name Defines a default domain name to complete unqualified host names. GC
ip name-server Configures available name servers GC
ip host Configures static host name-to-address mapping in the host cache GC
clear host Deletes entries from the host name-to-address cache PE
clear host dhcp Deletes entries from the DHCP host name-to-address mapping cache PE
show hosts Displays the default domain name, a list of name server hosts, static
and cached list of host names and addresses.
PE
Command Group Description Mode
interface ip Configures an IP interface and enters the IP interface configuration
mode.
GC
ip route Establishes static IP routes on the device. GC
key-chain Defines authentication key group for routing protocols. GC
key (key chain) Defines an authentication key on a key chain. KC
key (global) Creates an authentication key on the device. GC
key-string Specifies an authentication string for a key. KE
accept-lifetime Sets the time period during which the authentication key on a key
chain is valid to be received.
KC
send-lifetime Sets the time period during which an authentication key on a key
chain is valid for sending.
KC
ip maximum-paths Defines the maximum number of parallel routes. GC
show ip route Displays the routing table current state. UE
show ip protocols Displays the parameters and current state of the active routing
protocols.
PE
show key-chains Displays key-chains information on the device. PE
show keys Displays key information. PE