Owner's Manual

SNMP Commands 351
no snmp-server trap authentication
Default Configuration
Traps are enabled by default.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Examples
The following example displays the command to enable authentication failed SNMP traps.
snmp-server set
The
snmp-server set
global configuration command sets SNMP MIB value by the CLI.
Syntax
snmp-server set
variable-name name1 value1 [name2 value2 …]
variable-name
—MIB variable name.
name value...
—List of name and value pairs. In case of scalar MIBs there is only a single
pair of name values. In case of entry in a table the first pairs are the indexes, followed by
one or more fields.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
Although the CLI can set any required configuration, there might be a situation where a
SNMP user sets a MIB variable that does not have an equivalent command. In order to
generate configuration files that support those situations, the
snmp-server set
command is
used.
This
command is context sensitive.
Console (config)# snmp-server trap authentication