Owner's Manual
SNMP Commands 365
snmp-server v3-host
The
snmp-server v3-host
global configuration command specifies the recipient of Simple Network
Management Protocol Version 3 notifications. To remove the specified host, use the
no
form of this
command.
Syntax
snmp-server v3-host {
ip-address
|
hostname
}
username
[traps | informs] {noauth | auth |
priv} [udp-port
port
] [filter
filtername
] [timeout
seconds
] [retries
retries
]
no snmp-server v3-host {
ip-address
|
hostname
}
username
[traps | informs]
•
ip-address
—Specifies the IP address of the host (targeted recipient). For information
about specifying an out-of-band IP address, see the user guidelines.
•
hostname
—Specifies the name of the host. (Range:1-158 characters)
•
username
—Specifies the name of the user to use to generate the notification.
(Range: 1-24)
•
traps
—Indicates that SNMP traps are sent to this host.
•
informs
—Indicates that SNMP informs are sent to this host.
•
noauth
—Indicates no authentication of a packet.
•
auth
—Indicates authentication of a packet without encrypting it.
•
priv
—Indicates authentication of a packet with encryption.
•
port
—Specifies the UDP port of the host to use. (Range: 1-65535)
•
filtername
—Specifies a string that defines the filter for this host. If unspecified, nothing
is filtered. (Range: 1-30 characters)
•
seconds
—Specifies the number of seconds to wait for an acknowledgment before
resending informs. (Range: 1-300)
• retries—Specifies the maximum number of times to resend an inform request.
(Range: 0-255)
Default Configuration
• The default UDP port of the host to use is 162.
• The default timeout period to wait for an acknowedgement before resending informs is
15 seconds.
• The default maximum number of times to resend an inform request is 3.
Command Mode
Global Configuration mode