Owner's Manual

Command Groups 37
router ospf redistribute
connected
Enables advertisements of directly connected networks routes, running
OSPF.
GC
router ospf area virtual-link Defines an OSPF virtual link and enters the OSPF Virtual-link
Configuration mode.
GC
hello-interval Specifies the interval between hello packets that the software sends on
the OSPF virtual link interface.
OV
dead-interval Sets the interval at which hello packets must not be seen before its
neighbors declare the router down.
OV
retransmit-interval Specifies the time between LSA retransmissions for adjacencies
belonging to the OSPF virtual link interface.
OV
transmit-delay Sets the estimated time required to send a link-state update packet on
the OSPF virtual link interface.
OV
authentication Enables authentication for OSPF packets and specifies the type of
authentication.
OV
router ospf router-id Configures an OSPF router ID. GC
router ospf area stub Defines an area as a stub area. GC
router ospf area default-cost Specifies a cost for the default summary route sent into a stub area. GC
ospf Creates OSPF routing process on an interface. IC
ospf enable Activates OSPF on an interface. IC
ospf area Defines an interface area ID. IC
ospf cost Specifies the cost of sending a packet on an interface. IC
ospf priority Sets the router priority, which determines the designated router for the
network.
IC
ospf hello-interval Specifies the interval between hello packets the software sends on an
interface.
IC
ospf dead-interval Sets the interval at which hello packets must not be seen before
neighbors declare the router down.
IC
ospf retransmit-interval Specifies the time between LSA retransmissions for interface
adjacencies.
IC
ospf transmit-delay Sets the estimated time required to send a link-state update packet on
an interface.
IC
ospf authentication Enables authentication for OSPF packets and specifies the
authentication type.
IC
clear ip ospf process Clears redistribution based on OSPF routing. PE
show ip ospf Displays general OSPF routing information. UE
show ip ospf virtual-links Displays parameters and the current state of OSPF virtual links. UE