Owner's Manual

398 Spanning-Tree Commands
www.dell.com | support.dell.com
Example
The following example sets the configuration revision to 1.
show (mst)
The show MST configuration command displays the current or pending MST region configuration.
Syntax
show {current | pending}
Default Configuration
This command has no default configuration.
Command Mode
MST Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example displays a pending MST region configuration.
Console (config) # spanning-tree mst configuration
Console (config-mst) # revision 1
Device(config-mst)# show pending
Pending MST configuration
Name: Region1
Revision: 1
Instance Vlans Mapped State
-------- ------------ -----
0 1-9,21-4094 Enabled
1 10-20 Enabled