Owner's Manual

44 Command Groups
www.dell.com | support.dell.com
Syslog Commands
System Management Commands
Command Group Description Mode
logging on Controls error messages logging. GC
logging Logs messages to a syslog server. GC
logging console Limits messages logged to the console based on severity. GC
logging buffered Limits syslog messages displayed from an internal buffer based on
severity.
GC
logging buffered size Changes the number of syslog messages stored in the internal buffer. GC
clear logging Clears messages from the internal logging buffer. PE
logging file Limits syslog messages sent to the logging file based on severity. GC
clear logging file Clears messages from the logging file. PE
aaa logging Enables logging AAA login events. GC
file-system logging Enables logging file system events. GC
management logging Enables logging management access list (ACL) events. GC
show logging Displays the state of logging and the syslog messages stored in the
internal buffer.
PE
show logging file Displays the state of logging and the syslog messages stored in the
logging file.
PE
show syslog-servers Displays the syslog servers settings. PE
Command Group Description Mode
ping Sends ICMP echo request packets to another node on the network. UE
reload Reloads the operating system. PE
clock set Manually sets the system clock. PE
hostname Specifies or modifies the device host name. GC
asset-tag Specifies the device asset-tag. GC
show users Displays information about the active users. UE
show clock Displays the time and date from the system clock. UE
show system Displays system information. UE
show version Displays the system version information. UE
show system id Displays the service ID information. PE