Owner's Manual

VRRP Commands 475
show vrrp status
The show vrrp status privileged EXEC command displays Virtual Router Redundancy Protocol
(VRRP) status.
Syntax
show vrrp status [ ethernet interface-number | vlan vlan-id | port-channel number ]
•
ethernet interface-number —Ethernet port number.
•
vlan vlan-id —VLAN number.
•
port-channel number —Port-channel number.
Default Configuration
There are no user guidelines for this command.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Example
The following example configures authentication login.
The following table describes the significant fields shown in the display:
Console# show vrrp status
Interface VRID Address State Master MAC address
--------- ---- --------------- ---------- ---------------- --------------
-----
g1 10 1.1.1.99 initialize 0.0.0.0
00:00:5e:00:01:0a
Field Description
Interface Interface type and number.
VRID Virtual Router Identifier.
Address Virtual Router associated address.
State The current state of the virtual router. It can be: Initialize, Backup, Master.
Master The master router IP address.
MAC address The virtual router, virtual MAC address.