Owner's Manual

502 802.1x Commands
www.dell.com | support.dell.com
• discard-shutdown — Discard frames with source addresses that are not the supplicant
address, and shut down the port.
•
trap — Send SNMP traps
•
seconds — Minimum time in seconds between consecutive traps. (Range: 1- 1000000 )
Default Configuration
Discard frames with source addresses that are not the supplicant address. No traps.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
This command is relevant when Multiple Hosts is disabled and the user has been successfully
authenticated
Examples
The following example uses forward action to forward frames with source addresses that are not the
supplicant address:
show dot1x advanced
The show dot1x advanced privileged EXEC command displays 802.1x advanced features for the
device or for the specified interface.
Syntax
show dot1x advanced [ ethernet interface ]
•
interface — Ethernet interface
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Console(config-if)# dot1x single-host-violation forward trap 100