Owner's Manual

Address Table Commands 91
no bridge multicast forward-all
• add —Adds ports to the group.
•
remove —Removes ports from the group.
•
interface-list —Separate non consecutive valid Ethernet ports with a comma and no
spaces; a hyphen is used to designate a range of ports.
•
port-channel-number-list —Separate non consecutive valid port-channels with a comma
and no spaces; a hyphen is used to designate a range of port-channels.
Default Configuration
Disable forward-all on all ports.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
In this example all Multicast packets on port g8 are forwarded.
bridge multicast forbidden forward-all
The bridge multicast forbidden forward-all interface configuration command forbids a port to be a
forward-all-Multicast port. To restore the default, use the
no form of the bridge multicast forward-
all
command.
Syntax
bridge multicast forbidden forward-all { add | remove } { ethernet interface-list | port-channel
port-channel-number-list
}
no bridge multicast forward-all
• add —Forbids forwarding all Multicast packets.
•
remove —Does not forbid forwarding all Multicast packets.
•
interface-list —Separates non consecutive valid Ethernet ports with a comma and no
spaces; a hyphen is used to designate a range of ports.
•
port-channel-number-list —Separates non consecutive valid port-channels with a comma
and no spaces; a hyphen is used to designate a range of port-channels.
Console (config)# interface vlan 2
Console (config-if)# bridge multicast forward-all add ethernet g8