Owner's Manual

Address Table Commands 95
Example
In this example, the MAC-layer address 66:66:66:66:66:66 is added to port g1.
show bridge address-table
The show bridge address-table privileged EXEC command displays all entries in the bridge-
forwarding database.
Syntax
show bridge address-table [ vlan vlan ] [ ethernet interface | port-channel port-channel-
number
]
•
vlan —Specific valid VLAN, such as VLAN 1.
•
interface— A valid Ethernet port .
• port-channel-number —A valid port-channel number.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
There are no user guidelines for this command.
Console (config)# interface ethernet g1
Console (config-if)# port security routed secure-address
66:66:66:66:66:66