Release Notes

56 System Firmware Version 5.1.1.7
Release 5.0.1.3
 No Updates
Release 5.0.0.4
Command Issue
Show snmp filters
Snmp-server filter
The following note should be added to the command usage guidelines.
When a filter is defined, SNMP treats the filter as having an 'exclude all' statement at
the beginning of the filter. Unless an include statement is specified, all notifications
will be excluded.
aaa authorization {exec }
{default | <list_name>}
method1[method2]
no aaa authorization {exec}
{ default|<list_name>}
authorization exec [default
|<list_name>]
no authorization exec
debug aaa authorization
exec
no debug aaa authorization
exec
The following Exec Authorization CLI commands are missing from the CLI reference
guide
aaa authorization {exec } {default | <list_name>} method1[method2]
no aaa authorization {exec} { default|<list_name>}
authorization exec [default |<list_name>]
no authorization exec
debug aaa authorization exec
no debug aaa authorization exec
Release 4.2.2.3
 No Updates
Release 4.2.1.3
Command
Issue
Storm-control broadcast
The supported syntax is Storm-control broadcast [level rate] where
rate is a parameter to level and defined to be:
The storm-control threshold as percent of port speed. Percent of
port speed is converted to PacketsPerSecond based on 512 byte
average packet size and applied to HW.
If level is not used the default rate is 5.
name "RDU-NOC
Management VLAN"
The VLAN name command has been migrated to VLAN Config mode
and is no longer available in interface VLAN mode.
Release 4.2.0.4
 Please refer Dell PowerConnect CLI Reference Guide for more details
Release 4.1.1.9
 No Updates