Command Line Interface Guide

1010 DHCPv6 Commands
DHCPv6 Rebind Packets Received................. 0
DHCPv6 Release Packets Received................ 0
DHCPv6 Decline Packets Received................ 0
DHCPv6 Inform Packets Received................. 0
DHCPv6 Relay-forward Packets Received.......... 0
DHCPv6 Relay-reply Packets Received............ 0
DHCPv6 Malformed Packets Received.............. 0
Received DHCPv6 Packets Discarded.............. 0
Total DHCPv6 Packets Received.................. 0
DHCPv6 Advertisement Packets Transmitted....... 0
DHCPv6 Reply Packets Transmitted............... 0
DHCPv6 Reconfig Packets Transmitted............ 0
DHCPv6 Relay-reply Packets Transmitted......... 0
DHCPv6 Relay-forward Packets Transmitted....... 0
Total DHCPv6 Packets Transmitted............... 0
show ipv6 dhcp interface (Privileged EXEC)
Use the show ipv6 dhcp interface command in Privileged EXEC mode to
display configuration and status information about an IPv6 DHCP interface
or all interfaces.
Syntax
show ipv6 dhcp interface [ interface-id ]{statistics}
2CSPC4.X8100-SWUM100.book Page 1010 Wednesday, August 29, 2012 6:23 PM