Command Line Interface Guide

1012 DHCPv6 Commands
Example
The following example shows the output from this command when the
device has leased an IPv6 address from the DHCPv6 server on interface 1/0/1.
NOTE: Note that the interface is in client mode.
console#show ipv6 dhcp interface vlan 2
IPv6 Interface................................. Vl2
Mode...........................................
Client
State..........................................
ACTIVE
Server DUID....................................
00:03:00:01:00:13:c4:db:6c:00
T1 Time........................................ 0
days 12 hrs 0 mins 0 secs
T2 Time........................................ 0
days 19 hrs 12 mins 0 secs
Interface IAID An identifier for an identity association chosen by this Client.
Leased Address The IPv6 address leased by the DHCPv6 Server for this
interface.
Preferred Lifetime The preferred life time (in seconds) of the IPv6 Address leased
by the DHCPv6 Server.
Valid Lifetime The valid life time (in seconds) of the IPv6 Address leased by
the DHCPv6 Server.
Renew Time The time remaining (in seconds) to send a DHCPv6 Renew
request to DHCPv6 Server for the leased address.
Expiry Time The time (in seconds) when the DHCPv6 leased address
expires.
Term Description
2CSPC4.X8100-SWUM100.book Page 1012 Wednesday, August 29, 2012 6:23 PM