Command Line Interface Guide

DVMRP Commands 1025
-------------- -------------- -------------- -----
------
show ip dvmrp route
Use the show ip dvmrp route command in Privileged EXEC mode to display
the multicast routing information for DVMRP.
Syntax
show ip dvmrp route
Default Configuration
This command has no default condition.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays the multicast routing information for
DVMRP.
console#show ip dvmrp route
Upstream Expiry
Up Time
Source Address Neighbor Interface
Metric Time(secs) (secs)
-------------- -------- ---------------- ----------
------
2CSPC4.X8100-SWUM100.book Page 1025 Wednesday, August 29, 2012 6:23 PM