Command Line Interface Guide

Command Groups 103
Port Channel
mvr querytime Sets the MVR query response time. GC
mvr vlan Sets the MVR multicast VLAN. GC
mvr immediate Enables MVR Immediate Leave mode. IC
mvr type Sets the MVR port type. IC
mvr vlan group Use to participate in the specific MVR group. IC
show mvr Displays global MVR settings. PE
show mvr members Displays the MVR membership groups
allocated.
PE
show mvr interface Displays the MVR enabled interface
configuration.
PE
show mvr traffic Displays global MVR statistics. PE
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
Command Description Mode
a
channel-group Associates a port with a port-channel. IC
interface port-channel Enters the interface configuration mode of a
specific port-channel.
GC
interface range port-channel Enters the interface configuration mode to
configure multiple port-channels.
GC
hashing-mode Sets the hashing algorithm on trunk ports. IC (port-
channel)
lacp port-priority Configures the priority value for physical
ports.
IC
lacp system-priority Configures the system LACP priority. GC
lacp timeout Assigns an administrative LACP timeout. IC
port-channel min-links Sets the minimum number of links that must
be up in order for the port channel interface
to be declared up.
IC
show interfaces port-
channel
Displays port-channel information. PE
Command Description Mode
a
2CSPC4.X8100-SWUM100.book Page 103 Wednesday, August 29, 2012 6:23 PM