Command Line Interface Guide

1048 IGMP Proxy Commands
3 0 0 0 -----
-----
show ip igmp-proxy groups
Use the show ip igmp-proxy groups command in Privileged EXEC mode to
display a table of information about multicast groups that IGMP Proxy
reported. It displays status parameters only when IGMP Proxy is enabled.
Syntax
show ip igmp-proxy groups
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example attempts to display a table of information about
multicast groups that IGMP Proxy reported.
console#show ip igmp-proxy groups
Interface Index................................
vlan13
Group Address Last Reporter Up Time Member
State Filter Mode Sources
------------- --------------- ------- -----------
- ----------- ------
225.0.1.1 13.13.13.1 7 DELAY-
MEMBER Exclude 0
2CSPC4.X8100-SWUM100.book Page 1048 Wednesday, August 29, 2012 6:23 PM