Command Line Interface Guide

Command Groups 107
match vlan Adds to the specified class definition a match
condition based on the value of the layer 2
VLAN Identifier field.
CMC
mirror Mirrors all the data that matches the class
defined to the destination port specified.
PCMC
police-simple Establishes the traffic policing style for the
specified class.
PCMC
policy-map Establishes a new DiffServ policy or enters
policy map configuration mode.
GC
random-detect queue-
parms
Configures the green, yellow and red TCP and
non-TCP packet minimum and maximum
thresholds and corresponding drop
probabilities on an interface or all interfaces.
GC, IC,
or IR
random-detect exponential-
weighting-constant
Configures the decay in the calculation of the
average queue size user for WRED on an
interface or all interfaces.
GC, IC,
or IR
redirect Specifies that all incoming packets for the
associated traffic stream are redirected to a
specific egress interface (physical port or port-
channel).
PCMC
service-policy Attaches a policy to an interface in a particular
direction.
GC or
IC
show class-map Displays all configuration information for the
specified class.
PE
show classofservice dot1p-
mapping
Displays the current Dot1p (802.1p) priority
mapping to internal traffic classes for a specific
interface.
PE
show classofservice ip-dscp-
mapping
Displays the current IP DSCP mapping to
internal traffic classes for a specific interface.
PE
show classofservice trust Displays the current trust mode setting for a
specific interface.
PE
show diffserv Displays the DiffServ General Status
information.
PE
Command Description Mode
a
2CSPC4.X8100-SWUM100.book Page 107 Wednesday, August 29, 2012 6:23 PM