Command Line Interface Guide

IP Routing Commands 1075
Syntax
ip route ip addr { subnetmask | prefix length } nextHopRtr [ preference ]
no ip route
ip addr { subnetmask | prefix length } nextHopRtr [ preference ]
• ip-address — IP address of destination interface.
•
subnet-mask — Subnet mask of destination interface.
•
prefix-length — Length of prefix. Must be preceded with a forward slash
(/). (Range: 0-32 bits)
•
nextHopRtr — IP address of the next hop router.
•
preference — Specifies the preference value, a.k.a. administrative distance,
of an individual static route. (Range: 1-255)
Default Configuration
Default value of preference is 1.
Command Mode
Global Configuration mode
User Guidelines
For the static routes to be visible, you must:
• Enable ip routing globally.
• Enable ip routing for the interface.
• Confirm that the associated link is also up.
Example
The following example identifies the ip-address subnet-mask, next-hop-ip
and a preference value of 200.
console(config)#ip route 192.168.10.10 255.255.255.0
192.168.20.1 metric 200
2CSPC4.X8100-SWUM100.book Page 1075 Wednesday, August 29, 2012 6:23 PM