Command Line Interface Guide

108 Command Groups
Radius
show diffserv service
interface
Displays policy service information for the
specified interface and direction.
PE
show diffserv service
interface port-channel
Displays policy service information for the
specified interface and direction.
PE
show diffserv service brief Displays all interfaces in the system to which a
DiffServ policy has been attached.
PE
show interfaces cos-queue Displays the class-of-service queue
configuration for the specified interface.
PE
show interfaces random-
detect
Displays the WRED policy on an interface. PE
show policy-map Displays all configuration information for the
specified policy.
PE
show policy-map interface Displays policy-oriented statistics information
for the specified interface and direction.
PE
show service-policy Displays a summary of policy-oriented
statistics information for all interfaces.
PE
traffic-shape Specifies the maximum transmission
bandwidth limit for the interface as a whole.
GC or
IC
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
Command Description Mode
a
aaa accounting dot1x
default start-stop
Creates an accounting method list GC
accounting Applies an accounting method to a line
config.
LC
acct-port Sets the port that connects to the RADIUS
accounting server.
R
auth-port Sets the port number for authentication requests
of the designated radius server
.
R
Command Description Mode
a
2CSPC4.X8100-SWUM100.book Page 108 Wednesday, August 29, 2012 6:23 PM