Command Line Interface Guide

1080 IP Routing Commands
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes, Config mode and all Config sub-modes
User Guidelines
The Method field contains one of the following values.
ds
The following examples display all IP information and information specific to
VLAN 2.
console#show ip interface
Default Gateway....................... 0.0.0.0
Burned In MAC Address................. 001E.C9AA.AC84
Routing Interfaces:
Interface State IP Address IP Mask
Method
---------- ----- --------------- --------------- -
------
Vl1 Down 0.0.0.0 0.0.0.0
None
number Interface number. Valid only for loopback and VLAN types.
Field Description
DHCP The address is leased from a DHCP server.
Manual The address is manually configured.
Parameter Description
2CSPC4.X8100-SWUM100.book Page 1080 Wednesday, August 29, 2012 6:23 PM