Manualshelf

Command Line Interface Guide

ManualsBrandsDell ManualsserversDell PowerConnect 8100 Series
1081108210831084108510861087108810891090
1082 IP Routing Commands
IP Address............................. 10.131.11.66
Subnet Mask............................ 255.255.255.0
Default Gateway........................ 10.131.11.1
Configured IPv4 Protocol................. DHCP
Burned In MAC Address............... 001E.C9AA.AD1C
show ip protocols
Use the show ip protocols command in Privileged EXEC mode to display a
summary of the configuration and status for each unicast routing protocol.
The command lists all supported routing protocols, regardless of whether they
are currently configured or enabled.
Syntax
show ip protocols
Parameter Description
Parameter Description
BGP Section:
Routing Protocol BGP.
Router ID The router ID configured for BGP.
Local AS Number The AS number that the local router is in.
BGP Admin Mode Whether BGP is globally enabled or disabled.
Maximum Paths The maximum number of next hops in an internal or external
BGP route.
2CSPC4.X8100-SWUM100.book Page 1082 Wednesday, August 29, 2012 6:23 PM