Command Line Interface Guide

IP Routing Commands 1089
show ip route configured
Use the show ip route configured command in Privileged EXEC mode to
display the configured routes, whether they are reachable or not.
Syntax
show ip route configured
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
console#show ip route configured
Route Codes: R - RIP Derived, O - OSPF Derived, C -
Connected, S - Static
B - BGP Derived, IA - OSPF Inter Area
E1 - OSPF External Type 1, E2 - OSPF External
Type 2
N1 - OSPF NSSA External Type 1, N2 - OSPF NSSA
External Type 2
Default Gateway is not configured
S 10.0.0.0/8 [1/0] via 1.2.3.5
2CSPC4.X8100-SWUM100.book Page 1089 Wednesday, August 29, 2012 6:23 PM