Command Line Interface Guide

Command Groups 109
deadtime Improves Radius response times when a server is
unavailable by causing the unavailable server to
be skipped.
R
debug aaa accounting Enables debugging for accounting. PE
key Sets the authentication and encryption key for all
RADIUS communications between the switch
and the RADIUS daemon .
R
msgauth Enables the message authenticator attribute to
be used for the RADIUS Authenticating server
being configured.
R
name (RADIUS server) Assigns a name to a RADIUS server. R
primary Specifies that a configured server should be the
primary server in the group of authentication
servers which have the same server name.
R
priority Specifies the order in which the servers are to be
used, with 0 being the highest priority.
R
radius-server attribute 4 Sets the network access server (NAS) IP address
for the RADIUS server.
GC
radius-server deadtime Improves RADIUS response times when servers
are unavailable. Causes the unavailable servers
to be skipped.
GC
radius-server host Specifies a RADIUS server host. GC
radius-server key Sets the authentication and encryption key for
all RADIUS communications between the
switch and the RADIUS daemon.
GC
radius-server retransmit Specifies the number of times the software
searches the list of RADIUS server hosts.
GC
radius-server source-ip Specifies the source IP address used for
communication with RADIUS servers.
GC
radius-server timeout Sets the interval for which a switch waits for a
server host to reply.
GC
retransmit Specifies the number of times the software
searches the list of RADIUS server hosts before
stopping the search.
R
Command Description Mode
a
2CSPC4.X8100-SWUM100.book Page 109 Wednesday, August 29, 2012 6:23 PM