Command Line Interface Guide

1090 IP Routing Commands
show ip route connected
Use the show ip route connected command in Privileged EXEC mode display
connected routes. Connected routes are those that are reachable over a switch
interface.
Syntax
show ip route connected
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
console#show ip route connected
Route Codes: R - RIP Derived, O - OSPF Derived, C -
Connected, S - Static
B - BGP Derived, IA - OSPF Inter Area
E1 - OSPF External Type 1, E2 - OSPF External
Type 2
N1 - OSPF NSSA External Type 1, N2 - OSPF NSSA
External Type 2
IP Routing Commands 1009
Default Gateway is not configured
S 10.0.0.0/8 [1/0] via 1.2.3.5
2CSPC4.X8100-SWUM100.book Page 1090 Wednesday, August 29, 2012 6:23 PM