Command Line Interface Guide

1092 IP Routing Commands
RIP............................................ 120
Configured Default Gateway..................... 253
DHCP Default Gateway........................... 254
show ip route summary
Use the show ip route summary command in Privileged EXEC mode to
display the routing table summary, including best and non-best routes.
Syntax
show ip route summary [best]
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays the IP route summary.
console#show ip route summary
Connected Routes............................... 0
Static Routes.................................. 0
RIP Routes..................................... 0
Parameter Description
best Shows the number of best routes. To include the number of all
routes, do not use this optional parameter.
2CSPC4.X8100-SWUM100.book Page 1092 Wednesday, August 29, 2012 6:23 PM