Command Line Interface Guide

IP Routing Commands 1093
OSPF Routes.................................... 0
Intra Area Routes.............................. 0
Inter Area Routes.............................. 0
External Type-1 Routes......................... 0
External Type-2 Routes......................... 0
Total routes................................... 0
show ip traffic
Use the show ip traffic command in User EXEC mode to display IP statistical
information. Refer to RFC 1213 for more information about the fields that
are displayed.
Syntax
show ip traffic
Syntax Description
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays IP route preferences.
console>show ip traffic
IpInReceives................................... 24002
2CSPC4.X8100-SWUM100.book Page 1093 Wednesday, August 29, 2012 6:23 PM