Command Line Interface Guide

IP Routing Commands 1095
IcmpInTimestamps............................... 0
IcmpInTimestampReps............................ 0
IcmpInAddrMasks................................ 0
IcmpInAddrMaskReps............................. 0
IcmpOutMsgs.................................... 3
IcmpOutErrors.................................. 0
IcmpOutDestUnreachs............................ 0
IcmpOutTimeExcds............................... 0
IcmpOutParmProbs............................... 0
IcmpOutSrcQuenchs.............................. 0
IcmpOutRedirects............................... 0
IcmpOutEchos................................... 3
IcmpOutEchoReps................................ 3
IcmpOutTimestamps.............................. 0
IcmpOutTimestampReps........................... 0
IcmpOutAddrMasks............................... 0
show ip vlan
Use the show ip vlan command in Privileged EXEC mode to display the
VLAN routing information for all VLANs with routing enabled.
Syntax
show ip vlan
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
2CSPC4.X8100-SWUM100.book Page 1095 Wednesday, August 29, 2012 6:23 PM