Command Line Interface Guide

110 Command Groups
Spanning Tree
show aaa servers Displays the list of configured RADIUS servers
and the values configured for the global
parameters of the RADIUS client.
UE or
PE
show accounting methods Displays the configured accounting method
lists.
PE
show radius statistics Shows the statistics for an authentication or
accounting server.
UE or
PE
source-ip Specifies the source IP address to be used for
communication with RADIUS servers.
R
timeout Sets the timeout value in seconds for the
designated radius server.
R
usage Specifies the usage type of the server. R
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
Command Description Mode
a
clear spanning-tree
detected-protocols
Restarts the protocol migration process on all
interfaces or on the specified interface.
PE
exit (mst) Exits the MST configuration mode and applies
configuration changes.
MC
instance (mst) Maps VLANs to an MST instance. MC
name (mst) Defines the MST configuration name. MC
revision (mst) Defines the configuration revision number. MC
show spanning-tree Displays spanning tree configuration. PE
show spanning-tree
summary
Displays spanning tree settings and parameters
for the switch.
PE
spanning-tree Enables spanning-tree functionality. GC
spanning-tree auto-portfast Sets the port to auto portfast mode. IC
spanning-tree bpdu flooding Allows flooding of BPDUs received on
nonspanning-tree ports to all other non-
spanning-tree ports.
GC
Command Description Mode
a
2CSPC4.X8100-SWUM100.book Page 110 Wednesday, August 29, 2012 6:23 PM