Command Line Interface Guide

1108 IPv6 Routing Commands
• query-max-response-time — Maximum query response time (Range:
1–65535 milliseconds).
Default Configuration
The default query maximum response time is 10 seconds.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
Example
console(config-if-vlan3)#ipv6 mld query-max-response-
time 4500
ipv6 mld router
The ipv6 mld router command is used to enable MLD in the router in global
configuration mode and for a specific interface in interface configuration
mode. Use the “no” form of this command to disable MLD.
Syntax
ipv6 mld router
no ipv6 mld router
Default Configuration
MLD is disabled by default.
Command Mode
Global Configuration mode
Interface Configuration (VLAN) mode
User Guidelines
There are no user guidelines for this command.
2CSPC4.X8100-SWUM100.book Page 1108 Wednesday, August 29, 2012 6:23 PM