Command Line Interface Guide

112 Command Groups
TACACS+
VLAN
spanning-tree tcnguard Prevents a port from propagating topology
change notifications.
IC
spanning-tree transmit hold-
count
Set the maximum number of BPDUs that a
bridge is allowed to send within a hello time
window (2 seconds).
GC
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
Command Description Mode
a
a. For the meaning of each Mode abbreviation, see Mode Types on page 81.
key Specifies the authentication and encryption key
for all TACACS communications between the
device and the TACACS server.
TC
port Specifies a server port number. TC
priority Specifies the order in which servers are used. TC
show tacacs Displays TACACS+ server settings and
statistics.
PE
tacacs-server host Specifies a TACACS+ server host. GC
tacacs-server key Sets the authentication and encryption key for
all TACACS+ communications between the
switch and the TACACS+ daemon.
GC
tacacs-server timeout Sets the interval for which the switch waits for a
server host to reply.
GC
timeout Specifies the timeout value in seconds. TC
Command Description Mode
a
dvlan-tunnel ethertype Configures the EtherType for the interface. GC
interface vlan Enters the VLAN interface configuration mode. GC
interface range vlan Enters the interface configuration mode to
configure multiple VLANs.
GC
Command Description Mode
a
2CSPC4.X8100-SWUM100.book Page 112 Wednesday, August 29, 2012 6:23 PM