Command Line Interface Guide

Command Groups 113
mode dvlan-tunnel Enables Double VLAN tunneling on the
specified interface.
IC
name (VLAN
Configuration)
Configures a name to a VLAN. IC
private-vlan Defines a private VLAN association between
the primary and secondary VLANs.
VC
protocol group Attaches a vlanid to the protocol-based VLAN
identified by
groupid .
VC
protocol vlan group Adds the physical unit/slot/port interface to the
protocol-based VLAN identified by
groupid .
IC
protocol vlan group all Adds all physical unit/slot/port interfaces to the
protocol-based VLAN identified by
groupid .
GC
show dvlan-tunnel Displays all interfaces enabled for Double
VLAN Tunneling.
PE
show dvlan-tunnel interface Displays detailed information about Double
VLAN Tunneling for the specified interface.
PE
show interfaces switchport Displays switchport configuration. PE,
IC
show port protocol Displays the Protocol-Based VLAN information
for either the entire system or for the indicated
group.
PE
show vlan Displays detailed information, including
interface information and dynamic vlan type,
for a specific VLAN.
PE
show vlan association mac Displays the VLAN associated with a specific
configured MAC address.
PE
show vlan association subnet Displays the VLAN associated with a specific
configured IP subnet.
PE
show vlan private-vlan
switchport access vlan
Configures the VLAN ID when the interface is
in access mode.
IC
switchport forbidden vlan Forbids adding specific VLANs to a port. IC
Command Description Mode
a
2CSPC4.X8100-SWUM100.book Page 113 Wednesday, August 29, 2012 6:23 PM