Command Line Interface Guide

IPv6 Routing Commands 1139
5002::2 00:03:40
4001::2 00:03:40
5002::2 00:03:40
show ipv6 mld-proxy interface
Use the show ipv6 mld-proxy interface command to display a detailed list of
the host interface status parameters.
Syntax
show ipv6 mld-proxy interface
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC, Config mode and all Config sub-modes
User Guidelines
The following parameters are displayed only when MLD Proxy is enabled:
The column headings of the table associated with the interface are as follows:
Parameter Description
Interface The MLD Proxy interface.
Parameter Description
Ver The MLD version.
Query Rcvd Number of MLD queries received.
Report Rcvd Number of MLD reports received.
Report Sent Number of MLD reports sent.
Leaves Rcvd Number of MLD leaves received. Valid for version 2 only.
Leaves Sent Number of MLD leaves sent on the Proxy interface. Valid for version 2
only.
2CSPC4.X8100-SWUM100.book Page 1139 Wednesday, August 29, 2012 6:23 PM