Command Line Interface Guide

114 Command Groups
switchport general
acceptable-frame-type
tagged-only
Discards untagged frames at ingress. IC
switchport general allowed
vlan
Adds or removes VLANs from a port in General
mode.
IC
switchport general ingress-
filtering disable
Disables port ingress filtering. IC
switchport general pvid Configures the PVID when the interface is in
general mode.
IC
switchport mode Configures the VLAN membership mode of a
port.
IC
switchport mode private-
vlan
Defines a private VLAN association for an
isolated or community port or a mapping for a
promiscuous port.
IC
switchport private-vlan Defines a private-VLAN association for an
isolated or community port or a mapping for a
promiscuous port.
IC
switchport trunk Adds or removes VLANs from a trunk port. IC
vlan Creates a VLAN. VC
vlan (Global Config) Configures a VLAN. GC
vlan association mac Associates a MAC address to a VLAN. VC
vlan association subnet Associates an IP subnet to a VLAN. VC
vlan database Enters the VLAN database configuration mode. GC
vlan makestatic Changes a dynamically created VLAN to a static
VLAN.
VC
vlan protocol group Adds protocol-based VLAN groups to the
system.
GC
vlan protocol group add
protocol
Adds a protocol to the protocol-based VLAN
identified by
groupid .
GC
vlan protocol group name Adds a group name to the protocol-based VLAN
identified by
groupid .
GC
Command Description Mode
a
2CSPC4.X8100-SWUM100.book Page 114 Wednesday, August 29, 2012 6:23 PM