Command Line Interface Guide

1140 IPv6 Routing Commands
Example
console#show ipv6 mld-proxy interface
Interface................................ vlan 10
Ver Query Rcvd Report Rcvd Report Sent Leave Rcvd
Leave Sent
-----------------------------------------------------
-------------
1 2 0 0 0 2
2 3 0 4 ----- -----
show ipv6 mld traffic
The show ipv6 mld traffic command is used to display MLD statistical
information for the router.
Syntax
show ipv6 mld traffic
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
The following fields are displayed:
Field Description
Valid MLD Packets
Received
The number of valid MLD packets received by the
router.
2CSPC4.X8100-SWUM100.book Page 1140 Wednesday, August 29, 2012 6:23 PM