Command Line Interface Guide

1144 IPv6 Routing Commands
Route Codes: C - connected, S - static
O - OSPF Intra, OI - OSPF Inter, OE1 - OSPF Ext 1, OE2
- OSPF Ext 2
ON1 - OSPF NSSA Ext Type 1, ON2 - OSPF NSSA Ext Type 2
Default gateway is 10.1.20.1
S 0.0.0.0/0 [254/0] via 10.1.20.1
C 10.1.20.0/24 [0/1] directly connected, vlan2
C 20.1.20.0/24 [0/1] directly connected, vlan4
show ipv6 route preferences
Use the show ipv6 route preferences command in Privileged EXEC mode to
show the preference value associated with the type of route. Lower numbers
have a greater preference.
Syntax
show ipv6 route preferences
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example shows the preference value associated with the type of
route.
2CSPC4.X8100-SWUM100.book Page 1144 Wednesday, August 29, 2012 6:23 PM