Command Line Interface Guide

IPv6 Routing Commands 1145
console#show ipv6 route preferences
Local.......................................... 0
Static......................................... 1
OSPF Intra-area routes......................... 110
OSPF Inter-area routes......................... 110
OSPF External routes........................... 110
show ipv6 route summary
Use the show ipv6 route summary command in Privileged EXEC mode to
display a summary of the routing table for all routes, including best and non-
best routes. Use best to display the count summary for only best routes.
Syntax
show ipv6 route summary [best]
• best — Displays the count summary for only best routes.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays a summary of the routing table.
console#show ipv6 route summary
IPv6 Routing Table Summary - 0 entries
Connected Routes............................. 0
2CSPC4.X8100-SWUM100.book Page 1145 Wednesday, August 29, 2012 6:23 PM