Command Line Interface Guide

IPv6 Routing Commands 1149
show ipv6 vlan
Use the show ipv6 vlan command in Privileged EXEC mode to display IPv6
VLAN routing interface addresses.
Syntax
show ipv6 vlan
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays IPv6 VLAN routing interface addresses.
console#show ipv6 vlan
MAC Address used by Routing VLANs: 00:02:BC:00:30:68
VLAN ID IPv6 Address/Prefix Length
------- ---------------------------------------
1
traceroute ipv6
Use the traceroute ipv6 command in Privileged EXEC mode to discover the
routes that packets actually take when traveling to their destination through
the network on a hop-by-hop basis.
Syntax
traceroute ipv6 { ip-address | hostname } [ port ]
• ipv6-address — Destination IPv6 address.
2CSPC4.X8100-SWUM100.book Page 1149 Wednesday, August 29, 2012 6:23 PM