Command Line Interface Guide

Loopback Interface Commands 1153
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Examples
The following examples display information about configured loopback
interfaces.
console# show interfaces loopback
Loopback Id Interface IP Address Received
Packets Sent Packets
----------- --------- ---------- ----------------
------------
1 loopback 1
0.0.0.0 0 0
console# show interfaces loopback 1
Interface Link Status.......................... Up
IP Address.....................................
0.0.0.0 0.0.0.0
MTU size....................................... 1500
bytes
2CSPC4.X8100-SWUM100.book Page 1153 Wednesday, August 29, 2012 6:23 PM