Command Line Interface Guide

Multicast Commands 1171
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ip pim spt-threshold 100
show ip multicast
Use the show ip multicast command in Privileged EXEC mode to display the
system-wide multicast information.
Syntax
show ip multicast
Syntax Description
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays system-wide multicast information.
console#show ip multicast
Admin Mode........................... Enabled
Protocol State....................... Non-Operational
Table Max Size.......................... 256
Protocol................................. PIMDM
2CSPC4.X8100-SWUM100.book Page 1171 Wednesday, August 29, 2012 6:23 PM